Removal Procedure
WARNING: This page is about a different variant/trim than selected.
- Remove Fuel Tank Filler Pipe Housing. Refer to Fuel Tank Filler Pipe Housing Replacement (Equinox)Fuel Tank Filler Pipe Housing Replacement (Terrain)
- Remove Rear Wheelhouse Liner-Left Side. Refer to Rear Wheelhouse Liner Replacement- Left Side (Equinox)Rear Wheelhouse Liner Replacement- Left Side (Terrain)
- Remove Fuel Tank Filler Pipe Ground Bolts (1) (Qty: 2)
- Using only a low-pressure clean water hose, spray the upper surface of the emission reduction fluid tank, emission reduction filler pipe and connections to remove dirt and debris.
- Using only a low pressure air wand or air gun, dry the emission reduction tank, emission reduction filler pipe and connections.
- Disconnect Emission Reduction Fluid Tank Opening Filler (1) (Qty: 2). Refer to Plastic Collar Quick Connect Fitting Service
- Remove Emission Reduction Fluid Tank Opening Filler (1)