Conditions for Setting the DTC
WARNING: This page is about a different variant/trim than selected.
P0403
The ECM detects an open on the control circuit for greater than 2.5 s.
P0490
The ECM detects a short to voltage on the control circuit for greater than 2.5 s.
P1402
The ECM detects a low voltage on the EGR motor supply for greater than 2.5 s.
P1407
The ECM detects a short circuit between the open and close terminals of the EGR motor for greater than 2.5 s.
P140F
The ECM detects excessive current flow to the EGR motor for greater than 2.5 s.