Conditions for Running the DTC

• DTC P0016, P00C7, P0101, P0102, P0103, P0106, P0107, P0108, P0111, P0112, P0113, P0114, P0117, P0118, P0119, P0128, P0191, P0192, P0193, P0335, P0336, P0340, P0341, P0601, P0604, P0606, P0641, P0651, P0697, P06A3, P122B, P122C, P122D, P16A0, P16A1, P16A2, P16F3, P2122, P2123, P2127, P2128, P2138, P2227, P2228, P2229, P2230, P227B, P227C, P227D, P227E = Not set
• Crankshaft Position Sensor & Camshaft Position Sensor = Synchronized
• Engine Coolant Temperature = -7 to 125°C (19.4 to 257°F)
• Engine Speed = 1, 000 to 3, 200 RPM
• Rough Road Signal = Not Detected
• System Voltage = 9 to 32 V

Frequency the DTC runs = Continuously - After the running conditions are met