Conditions for Running the DTC
WARNING: This page is about a different variant/trim than selected.
Condition 1
- DTC P0107, P0108, P2228, P2229, P227C, P227D = Not pending
- DTC P0106, P0107, P0108, P2227, P2228, P2229, P2230, P227B, P227C, P227D, P227E = Not set
- Engine = Not Running
- Time between current ignition cycle and the last time the engine was running = Greater than 5 s
- Manifold Absolute Pressure = 50 to 115 kPa (7.3 to 16.7 PSI)
- Barometric Pressure - BARO Sensor 1 = 50 to 115 kPa (7.3 to 16.7 PSI)
- Barometric Pressure - BARO Sensor 2 = 50 to 115 kPa (7.3 to 16.7 PSI)
Frequency the DTC runs = Continuously - After the running conditions are met
Condition 2
- DTC P0101, P0102, P0103, P0107, P0108, P0116, P0117, P0118, P0119, P0128, P0201, P0202, P0203, P0204, P020A, P020B, P020C, P020D, P0216, P02EE, P02EF, P02E8, P02E9, P02F0, P02F1, P0261, P0262, P0264, P0265, P0267, P0268, P0270, P0271, P0335, P0336, P062B, P062D, P111E, P122D, P1248, P1249, P124A, P124B, P126A, P16A0, P16A1, P16A2, P2147, P2148, P2150, P2151, P2227, P2228, P2229, P2230, P227B, P227C, P227D, P227E = Not set
- Ignition Voltage = Greater than 11 V
- Engine = Running
- Engine Speed = Less than 950 RPM
- Intake Air Flow Valve Position = Greater than 90%
- Calculated Fuel Flow = Less than a predefined threshold
- Engine Coolant Temperature = Warmer than 70°C (158°F)
Frequency the DTC runs = Continuously - After the running conditions are met