Circuit/System Description
WARNING: This page is about a different variant/trim than selected.
For an overview of the component/system, refer to: Fuel System Description
| Circuit | Description |
|---|---|
| Control - High | The output circuit is switched to 12 V to activate the component. The output is PWM controlled. |
| Control - Low | The output circuit is switched to ground to activate the component. The output is PWM controlled. |
| Component | Description |
|---|---|
| G18 High Pressure Fuel Pump | The fuel pressure regulator is a solenoid valve that restricts the flow of fuel to the high pressure fuel pump and thereby controls the pressure the pump can produce. |
| K20 Engine Control Module | The control module controls a series of actuators to ensure optimal engine performance. The control module does this by reading values from a variety of sensors, interprets the data and adjusts the engine actuators accordingly. |