LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2018 >> Equinox L >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 12 (Automatic Transmission - 9T45 (M3U) Or 9T50 (M3D M3H) - Repair Instructions - On Vehicle) >> Repair Instructions - On Vehicle >> Control Valve Body Replacement >> Removal Procedure

Removal Procedure

WARNING: This page is about a different variant/trim than selected.
    Fig 1: Control Valve Body Cover
    GM4489058Courtesy of GENERAL MOTORS COMPANY
  1. Remove the control valve body cover (1) from the transmission. Refer to Control Valve Body Cover Replacement 
  2. Front Bumper Fascia - Remove - REMOVAL PROCEDURE (Equinox) , or REMOVAL PROCEDURE (Terrain)
    3. Fig 2: Control Valve Body
    GM4493880Courtesy of GENERAL MOTORS COMPANY
  3. Remove the control valve body (1) from the transmission. Refer to Control Valve Body Assembly Removal (without ETRS)Control Valve Body Assembly Removal (with ETRS)
  4. Disassemble the control valve body assembly (1). CONTROL VALVE BODY ASSEMBLY DISASSEMBLE (WITHOUT ETRS) , or CONTROL VALVE BODY ASSEMBLY DISASSEMBLE (WITH ETRS)
scientia non olet · About LEMON Manuals