LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2018 >> Equinox L >> Repair and Diagnosis >> Body & Frame >> Exterior Body Panels >> Bumpers And Fascias >> Repair Instructions >> Front Bumper Fascia Replacement (Equinox) >> Removal Procedure

Removal Procedure

    Fig 1: Front Tire Front Air Deflector
    GM4572710Courtesy of GENERAL MOTORS COMPANY
  1. Remove Front Tire Front Air Deflector (1) - Front Tire Front Air Deflector Replacement (Equinox)
    2. Fig 2: Underbody Front Air Deflector
    GM4572714Courtesy of GENERAL MOTORS COMPANY
  2. Remove Underbody Front Air Deflector (1) -Underbody Front Air Deflector Replacement (Equinox)
    3. Fig 3: Front Wheelhouse Liner
    GM4572716Courtesy of GENERAL MOTORS COMPANY
  3. Remove Front Wheelhouse Liner- Left Side (1) - Front Wheelhouse Liner Replacement - Left Side (Equinox)
  4. Remove Front Wheelhouse Liner- Right Side - Front Wheelhouse Liner Replacement - Right Side (Equinox)
    5. Fig 4: Front Bumper Fascia Bolt
    GM4572719Courtesy of GENERAL MOTORS COMPANY
  5. Remove Front Bumper Fascia Bolt (1) - [6x]
    6. Fig 5: Front Bumper Fascia Bolt
    GM4572721Courtesy of GENERAL MOTORS COMPANY
  6. Remove Front Bumper Fascia Bolt (1).
    7. Fig 6: Fascia
    GM4572722Courtesy of GENERAL MOTORS COMPANY
  7. Carefully push a small nylon wedge between the fascia (1) and the fascia guide. Insert a small flat-bladed tool into the fascia slot and depress the snaps one at a time and pull on the fascia at the same time to gradually remove the fascia.
    8. Fig 7: Fascia
    GM4572724Courtesy of GENERAL MOTORS COMPANY
  8. With the aid of an assistant, remove the fascia. (1)
  9. Disconnect all electrical connectors.
scientia non olet · About LEMON Manuals