LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2018 >> Equinox L >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 12 (Automatic Transmission - 9T45 (M3U) Or 9T50 (M3D M3H) - Repair Instructions - On Vehicle) >> Repair Instructions - On Vehicle >> Control Valve Body Replacement >> Installation Procedure

Installation Procedure

WARNING: This page is about a different variant/trim than selected.
    Fig 1: Control Valve Body
    GM4493880Courtesy of GENERAL MOTORS COMPANY
  1. Assemble the control valve body assembly (1). CONTROL VALVE BODY ASSEMBLY ASSEMBLE (WITHOUT ETRS) , or CONTROL VALVE BODY ASSEMBLY ASSEMBLE (WITH ETRS)
  2. Install the control valve body (1) to the transmission. Refer to Control Valve Body Assembly Installation (without ETRS)Control Valve Body Assembly Installation (with ETRS)
  3. Front Bumper Fascia - Install - INSTALLATION PROCEDURE (Equinox) , or INSTALLATION PROCEDURE (Terrain)
    4. Fig 2: Control Valve Body Cover
    GM4489058Courtesy of GENERAL MOTORS COMPANY
  4. Install the control valve body cover (1) to the transmission. Refer to Control Valve Body Cover Replacement 
scientia non olet · About LEMON Manuals