LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2018 >> Equinox L >> Repair and Diagnosis >> Body & Frame >> Exterior Body Panels >> Bumpers And Fascias >> Repair Instructions >> Front Bumper Fascia Replacement (Equinox) >> Installation Procedure

Installation Procedure

Fig 1: Fascia
GM4572724Courtesy of GENERAL MOTORS COMPANY
  1. Transfer components as necessary.
  2. With the aid of an assistant, install the fascia. (1)
  3. Connect the electrical connectors.
    4. Fig 2: Fascia
    GM4572722Courtesy of GENERAL MOTORS COMPANY
  4. Secure the front bumper fascia (1) to the front bumper fascia guide.
    5. Fig 3: Front Bumper Fascia Bolt
    GM4572721Courtesy of GENERAL MOTORS COMPANY
    CAUTION:

    Refer to Fastener Caution .

  5. Install Front Bumper Fascia Bolt (1) and tighten 2.5 N.m (22 lb in)
    6. Fig 4: Front Bumper Fascia Bolt
    GM4572719Courtesy of GENERAL MOTORS COMPANY
  6. Install Front Bumper Fascia Bolt (1) and tighten [6x] 2.5 N.m (22 lb in)
    7. Fig 5: Front Wheelhouse Liner
    GM4572716Courtesy of GENERAL MOTORS COMPANY
  7. Install Front Wheelhouse Liner- Left Side (1) - Front Wheelhouse Liner Replacement - Left Side (Equinox)
  8. Install Front Wheelhouse Liner- Right Side - Front Wheelhouse Liner Replacement - Right Side (Equinox)
    9. Fig 6: Underbody Front Air Deflector
    GM4572714Courtesy of GENERAL MOTORS COMPANY
  9. Install Underbody Front Air Deflector (1) - Underbody Front Air Deflector Replacement (Equinox)
    10. Fig 7: Front Tire Front Air Deflector
    GM4572710Courtesy of GENERAL MOTORS COMPANY
  10. Install Front Tire Front Air Deflector (1) - Front Tire Front Air Deflector Replacement (Equinox)
scientia non olet · About LEMON Manuals