Front Seat Tilt Adjuster Actuator Replacement
WARNING: This page is about a different car, the 2019 Buick Cascada, 2018 Buick Cascada, and 2017 Buick Cascada. However, it is still accessible from the selected car via links, so may be relevant.
| Callout | Component Name |
|---|---|
| Preliminary Procedures Remove the front seat. Refer to Driver or Passenger Seat Removal and Installation . |
|
| 1 | Front Seat Tilt Actuator Screw
CAUTION:
Refer to Fastener Caution . Tighten 10 N.m (89 lb in) |
| 2 | Roll Pin Procedure Use a hammer and small round tool to tap the roll pin out. |
| 3 | Front Seat Tilt Adjuster Actuator Procedure Disconnect electrical connector. |