Driver Seat Outer Adjuster Rear Vertical Actuator Replacement
WARNING: This page is about a different car, the 2019 Buick Cascada, 2018 Buick Cascada, and 2017 Buick Cascada. However, it is still accessible from the selected car via links, so may be relevant.
| Callout | Component Name |
|---|---|
| Preliminary Procedure Remove the front seat. Refer to Driver or Passenger Seat Removal and Installation . |
|
| 1 | Front Seat Outer Adjuster Rear Vertical Actuator Screw
CAUTION:
Refer to Fastener Caution . Tighten 42 N.m (31 lb ft) |
| 2 | Roll Pin Procedure Use a hammer and small round tool to tap the roll pin out. |
| 3 | Front Seat Outer Adjuster Rear Vertical Actuator Procedure Disconnect electrical connector. |