LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2017 >> Spark LT, Automatic CVT Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 64 (Engine Mechanical - 1.6L (LWC)) >> Repair Instructions - On Vehicle >> Oil Pan Replacement >> Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2019 Buick Cascada, 2018 Buick Cascada, and 2017 Buick Cascada. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the oil dipstick.
  2. Raise and support the vehicle. Lifting and Jacking the Vehicle
  3. Front Compartment Splash Shield Replacement - Remove
  4. { If equipped } Engine Shield Replacement - Remove
  5. Drain the engine oil. Engine Oil and Oil Filter Replacement 
  6. Exhaust Front Pipe Replacement - Remove
  7. GM3213270

    Wiring Harness(4) - Disconnect

  8. Bolt(1, 2) - Remove[2x]
  9. Remove the transmission converter cover (5).
  10. Bolt(3) - Remove
  11. GM3213273

    Oil Pan Bolt(2) - Remove[13x]

  12. Use a suitable tool to remove the oil pan (1) evenly all the way around.
  13. In case of reusing the old oil pan or engine oil level sensor. Refer to Oil Pan Cleaning and Inspection .
scientia non olet · About LEMON Manuals