LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2017 >> Spark LT, Automatic CVT Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 64 (Engine Mechanical - 1.6L (LWC)) >> Repair Instructions - On Vehicle >> Engine Oil Level Sensor Replacement >> Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2019 Buick Cascada, 2018 Buick Cascada, and 2017 Buick Cascada. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the engine shield, if equipped. Refer to Engine Shield Replacement .
  2. Remove the underbody front brace. Refer to Underbody Brace Replacement - Front .
  3. GM2966466

    Remove the oil pan drain plug (2) from the oil pan (1).

  4. Drain the engine oil.
    5. CAUTION:

    Refer to Fastener Caution .

  5. Install the NEW oil pan drain plug to the oil pan and tighten to 14 N.m (124 lb in).
  6. GM2966467

    Remove the 3 oil level sensor bolts (2).

  7. Remove the oil level sensor (3).
  8. Remove the oil level sensor gasket (1).
scientia non olet · About LEMON Manuals