LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2017 >> Spark LT, Automatic CVT Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 61 (Engine Cooling System) >> Repair Instructions >> Auxiliary Water Pump Outlet Hose Replacement >> Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2019 Buick Cascada, 2018 Buick Cascada, and 2017 Buick Cascada. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the battery tray. Refer to Battery Tray Replacement .
  2. Raise and support the vehicle. Refer to Lifting and Jacking the Vehicle .
  3. Drain coolant fluid. Refer to Cooling System Draining and Filling .
  4. Place a collecting basin underneath.
  5. Remove the starter. Refer to Starter Replacement .
  6. GM3137471

    Unlock the quick fitting (3).

  7. Remove the auxiliary water pump outlet hose clamp (5).
  8. Remove the auxiliary water pump outlet hose (4) from the auxiliary water pump (2) and from the water outlet housing (1).
scientia non olet · About LEMON Manuals