LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2017 >> Spark LT, Automatic CVT Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 58 (Engine Controls And Fuel - 1.6L (LWC) - Repair Instructions) >> Repair Instructions >> Fuel Injector Replacement >> Cleaning Procedure

Cleaning Procedure

WARNING: This page is about a different car, the 2019 Buick Cascada, 2018 Buick Cascada, and 2017 Buick Cascada. However, it is still accessible from the selected car via links, so may be relevant.
  1. Clean the fuel injector bores. Clean the fuel injectors, if the fuel injectors will be re-installed. Refer to Fuel Injector and Fuel Injector Bore Cleaning and Inspection .
  2. Inspect the NEW fuel injector. Refer to Fuel Injector and Fuel Injector Bore Cleaning and Inspection .