LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2017 >> Spark LT, Automatic CVT Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 48 (Seat Belt System) >> Repair Instructions >> Seat Belt Reach Assist Arm Replacement >> Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2019 Buick Cascada, 2018 Buick Cascada, and 2017 Buick Cascada. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the front seat belt from the front seat belt anchor plate. Refer to Front Seat Belt Anchor Plate Tensioner Replacement .
  2. GM4377201

    Slightly pull out the seat belt reach assist arm (1) and remove it from the quarter upper trim panel as shown in the graphic.

  3. Pull the seat belt (2) through the seat belt reach assist arm.
scientia non olet · About LEMON Manuals