Front Seat Belt Anchor Plate Tensioner Replacement

WARNING: This page is about a different car, the 2019 Buick Cascada, 2018 Buick Cascada, and 2017 Buick Cascada. However, it is still accessible from the selected car via links, so may be relevant.

Callout	Component Name
WARNING: Refer to SIR Seatbelt Pretensioner Handling Warning . Preliminary Procedures Remove the front side door sill trim plate. Refer to Front Side Door Sill Trim Plate Replacement . Set the front seat to the front to gain a better access.
1	Front Seat Belt Tensioner Cap
2	Front Seat Belt Tensioner Fastener CAUTION: Refer to Fastener Caution . Tighten 5 N.m (44 lb in)
3	Front Seat Belt Tensioner Cover
4	Front Seat Belt Tensioner Seat Belt Latch Procedure Remove the seat belt with latch from front seat belt tensioner.
5	Front Seat Belt Tensioner Fastener Tighten 45 N.m (33 lb ft)
6	Front Seat Belt Tensioner Procedure Disconnect the electrical connector.