LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2017 >> Spark LT, Automatic CVT Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 48 (Seat Belt System) >> Repair Instructions >> Seat Belt Reach Assist Arm Replacement >> Installation Procedure

Installation Procedure

WARNING: This page is about a different car, the 2019 Buick Cascada, 2018 Buick Cascada, and 2017 Buick Cascada. However, it is still accessible from the selected car via links, so may be relevant.
  1. GM4377201

    Pull the seat belt (2) through the seat belt reach assist arm.

  2. Slightly push the seat belt reach assist arm (1) to the quarter upper trim panel as shown in the graphic.
  3. Install the front seat belt to the front seat belt anchor plate. Refer to Front Seat Belt Anchor Plate Tensioner Replacement .
scientia non olet · About LEMON Manuals