Front Seat Belt Buckle Replacement

WARNING: This page is about a different car, the 2019 Buick Cascada, 2018 Buick Cascada, and 2017 Buick Cascada. However, it is still accessible from the selected car via links, so may be relevant.

Callout	Component Name
Preliminary Procedures SIR disabling and enabling. Refer to SIR Disabling and Enabling . Remove the driver or passenger seat. Refer to Driver or Passenger Seat Removal and Installation .
1	Driver or Passenger Seat Belt Buckle Fastener CAUTION: Refer to Fastener Caution . Procedure Re-cut the threads of the seat frame. Refer to Thread Inserts . Fastener is microencapsulated. Install a NEW driver or passenger seat belt buckle bolt. Tighten 45 N.m (33 lb ft)
2	Driver or Passenger Seat Belt Buckle Procedure Disconnect the electrical connector.

Callout

Component Name

Preliminary Procedures

SIR disabling and enabling. Refer to SIR Disabling and Enabling .
Remove the driver or passenger seat. Refer to Driver or Passenger Seat Removal and Installation .

Driver or Passenger Seat Belt Buckle Fastener

CAUTION:

Refer to Fastener Caution .

Procedure

Re-cut the threads of the seat frame. Refer to Thread Inserts .
Fastener is microencapsulated. Install a NEW driver or passenger seat belt buckle bolt.

Tighten
45 N.m (33 lb ft)

Driver or Passenger Seat Belt Buckle
Procedure
Disconnect the electrical connector.