Rear Seat Outer Hinge Finish Cover Replacement
WARNING: This page is about a different car, the 2019 Buick Cascada, 2018 Buick Cascada, and 2017 Buick Cascada. However, it is still accessible from the selected car via links, so may be relevant.
| Callout | Component Name |
|---|---|
| Preliminary Procedure Remove the rear seat back cushion. Refer to Rear Seat Back Cushion Removal and Installation - Right Side , or Rear Seat Back Cushion Removal and Installation - Left Side . |
|
| 1 | Rear Seat Back Outer Pivot Bolt
CAUTION:
Refer to Fastener Caution . Tighten 23 N.m (17 lb ft) |
| 2 | Rear Seat Back Cushion Outer Pivot Bolt Bushing |
| 3 | Rear Seat Back Cushion Outer Pivot Bolt Spring |
| 4 | Rear Seat Outer Hinge Finish Cover |