LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2017 >> Spark LT, Automatic CVT Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 40 (Seat Hardware, Seat Trim, And Upholstery) >> Repair Instructions >> Front Seat Back Latch Release Handle Bezel Replacement

Front Seat Back Latch Release Handle Bezel Replacement

WARNING: This page is about a different car, the 2019 Buick Cascada, 2018 Buick Cascada, and 2017 Buick Cascada. However, it is still accessible from the selected car via links, so may be relevant.
GM2716947
Callout Component Name

Preliminary Procedures

  1. Remove the front seat back cushion latch release handle. Refer to Driver or Passenger Seat Back Cushion Latch Release Handle Replacement .
  2. Remove the front seat back cushion cover and pad. Refer to Front Seat Back Cover and Pad Replacement .
1 Front Seat Back Latch Release Handle Bezel Assembly

Procedure

  1. Detach the bowden cable from backrest.
  2. Unclip the front seat back latch release handle bezel from frame.
  3. Remove the front seat back latch release handle bezel assembly.
scientia non olet · About LEMON Manuals