LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2017 >> Spark LT, Automatic CVT Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 40 (Seat Hardware, Seat Trim, And Upholstery) >> Repair Instructions >> Driver or Passenger Seat Wiring Harness Replacement

Driver or Passenger Seat Wiring Harness Replacement

WARNING: This page is about a different car, the 2019 Buick Cascada, 2018 Buick Cascada, and 2017 Buick Cascada. However, it is still accessible from the selected car via links, so may be relevant.
GM2191275
Callout Component Name

Preliminary Procedures

  1. Remove the front seat cushion cover and pad. Refer to Front Seat Cushion Cover and Pad Replacement .
  2. Remove the front seat back cushion cover and pad. Refer to Front Seat Back Cover and Pad Replacement .
1 Driver or Passenger Seat Wiring Harness

Procedure

  1. Remove the wiring harness from front seat frame and front seat back frame.
  2. Note location and routing of the wiring harness prior to ensure proper reinstallation.
scientia non olet · About LEMON Manuals