Ignition Lock Cylinder Theft Deterrent Sensor Cover Replacement

WARNING: This page is about a different car, the 2019 Buick Cascada, 2018 Buick Cascada, and 2017 Buick Cascada. However, it is still accessible from the selected car via links, so may be relevant.

Callout	Component Name
Preliminary Procedures Remove the ignition and start switch housing. Refer to Ignition and Start Switch Housing Replacement .
1	Ignition Lock Cylinder Theft Deterrent Sensor Cover Bolt (Qty: 3) CAUTION: Refer to Fastener Caution . Procedure Use a suitable chisel to remove the 3 bolts. Install the 3 NEW bolts and tighten until head tears off.
2	Ignition Lock Cylinder Theft Deterrent Sensor Cover Procedure Remove the ignition lock cylinder theft deterrent sensor cover.

Callout

Component Name

Preliminary Procedures
Remove the ignition and start switch housing. Refer to Ignition and Start Switch Housing Replacement .

Ignition Lock Cylinder Theft Deterrent Sensor Cover Bolt (Qty: 3)

CAUTION:

Refer to Fastener Caution .

Procedure

Use a suitable chisel to remove the 3 bolts.
Install the 3 NEW bolts and tighten until head tears off.

Ignition Lock Cylinder Theft Deterrent Sensor Cover
Procedure
Remove the ignition lock cylinder theft deterrent sensor cover.