Front Side Door Trim Replacement

WARNING: This page is about a different car, the 2019 Buick Cascada, 2018 Buick Cascada, and 2017 Buick Cascada. However, it is still accessible from the selected car via links, so may be relevant.

Callout	Component Name
Preliminary Procedures Remove the front side door inside handle bolt finish cap. Refer to Front Side Door Inside Handle Bolt Finish Cap Replacement . Remove the front side door pull handle cover. Refer to Front Side Door Pull Handle Cover Replacement . Remove the front side door window switch opening cover. Refer to Front Side Door Window Switch Opening Cover Replacement .
1	Front Side Door Inside Handle Bolt CAUTION: Refer to Fastener Caution . NOTE: Pull handle back to remove cap. Use suitable tool to unsnap.
2	Front Side Door Pull Handle Bolt (Qty: 2) NOTE: It is not necessary to remove the three visible bolts at the handle.
3	Front Side Door Trim Clip-Green (Qty: 3) WARNING: These retainers/clips MUST be replaced with new retainers/clips anytime they become loose or are removed. Failure to replace these retainers/clips after they become loose or are removed may cause a severe loss of safety in cases of a crash and lead to personal injury.
4	Front Side Door Trim Clip-Blue (Qty: 6) WARNING: These retainers/clips MUST be replaced with new retainers/clips anytime they become loose or are removed. Failure to replace these retainers/clips after they become loose or are removed may cause a severe loss of safety in cases of a crash and lead to personal injury.
5	Front Side Door Trim Procedure Pull upwards on the door lock retainer cable to disengage. Disconnect the electrical connectors.