Front Side Door Window Switch Opening Cover Replacement

WARNING: This page is about a different car, the 2019 Buick Cascada, 2018 Buick Cascada, and 2017 Buick Cascada. However, it is still accessible from the selected car via links, so may be relevant.

Callout	Component Name
Preliminary Procedure Front Side Door Pull Handle Cover Replacement
1	Front Side Door Window Switch Opening Cover Fastener CAUTION: Refer to:Fastener Caution . Tighten 2.5 N.m (22 lb in)
2	Front Side Door Window Switch Opening Cover Procedure Use a flat-bladed plastic trim tool to remove the front side door window switch opening cover. To remove the front side door window switch opening cover, start to unclip at the front and remove the cover in forward direction. NOTE: Do not scratch trim insert (especially leather) with front edge of cover window switch. When replacing the front side door window opening cover, remove the front side door window and multifunction switch. Refer to Front Side Door Window and Multifunction Switch Replacement .

Callout

Component Name

Preliminary Procedure
Front Side Door Pull Handle Cover Replacement

Front Side Door Window Switch Opening Cover Fastener

CAUTION:

Refer to:Fastener Caution .

Tighten
2.5 N.m (22 lb in)

Front Side Door Window Switch Opening Cover

Procedure

Use a flat-bladed plastic trim tool to remove the front side door window switch opening cover.
To remove the front side door window switch opening cover, start to unclip at the front and remove the cover in forward direction.

NOTE:

Do not scratch trim insert (especially leather) with front edge of cover window switch.

When replacing the front side door window opening cover, remove the front side door window and multifunction switch. Refer to Front Side Door Window and Multifunction Switch Replacement .