LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2017 >> Spark LT, Automatic CVT Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 26 (Automatic Transmission - 6T45 (MH7) - Repair Instructions - On Vehicle) >> Repair Instructions - On Vehicle >> Transmission Mount Bracket Replacement - Rear >> Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2019 Buick Cascada, 2018 Buick Cascada, and 2017 Buick Cascada. However, it is still accessible from the selected car via links, so may be relevant.
  1. Raise and support the vehicle. Refer to Lifting and Jacking the Vehicle .
  2. Remove the underbody brace - front. Refer to Underbody Brace Replacement - Front .
  3. Remove the exhaust front pipe. Refer to Exhaust Front Pipe Replacement .
  4. Using a suitable jack stand, support the rear of the transmission.
  5. GM2190832

    Remove the transmission bracket mount to mount through bolt (1).

  6. GM2190833

    Remove the 3 transmission mount to transmission bolts (1).

  7. Remove the transmission mount bracket - rear (2).
scientia non olet · About LEMON Manuals