LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2017 >> Spark LT, Automatic CVT Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 26 (Automatic Transmission - 6T45 (MH7) - Repair Instructions - On Vehicle) >> Repair Instructions - On Vehicle >> Transmission Mount Bracket Replacement - Rear >> Installation Procedure

Installation Procedure

WARNING: This page is about a different car, the 2019 Buick Cascada, 2018 Buick Cascada, and 2017 Buick Cascada. However, it is still accessible from the selected car via links, so may be relevant.
  1. GM2190833

    Install the transmission mount bracket - rear (2).

    2. CAUTION:

    Refer to Fastener Caution .

  2. Install the 3 transmission mount to transmission bolts (1) and tighten to 100 N.m (74 lb ft).
  3. GM2190832

    Install the transmission bracket mount to mount through bolt (1) and tighten to 100 N.m (74 lb ft).

  4. Remove the jack stand.
  5. Install the exhaust front pipe. Refer to Exhaust Front Pipe Replacement .
  6. Install the underbody brace - front. Refer to Underbody Brace Replacement - Front .
  7. Lower the vehicle.
scientia non olet · About LEMON Manuals