Clutch Backing Plate Retaining Ring Specifications
WARNING: This page is about a different variant/trim than selected.
Variable High Clutch Backing Plate Retaining Ring
| Clutch Pack Travel Specification - 0.98 - 1.54 mm (0.039 - 0.061 in) | ||
|---|---|---|
| Retaining Ring Thickness | Ring Identification Color | |
| Metric | English | |
|
NOTE:
After measuring clutch pack travel, determine if the measurement is within the specification. If the measurement is not within the specification, measure the thickness of the existing retaining ring and then choose a thicker or thinner retaining ring that will bring the measurement within specification.
|
||
| 1.40 - 1.50 mm | 0.055 - 0.059 in | Dark Green |
| 1.70 - 1.80 mm | 0.067 - 0.071 in | Yellow |
| 2.01 - 2.11 mm | 0.079 - 0.083 in | No Color |
| 2.31 - 2.41 mm | 0.091 - 0.095 in | Light Blue |
| 2.62 - 2.72 mm | 0.103 - 0.107 in | Orange |
Variable Low Clutch Backing Plate Retaining Ring
| Clutch Pack Travel Specification - 0.90 - 1.46 mm (0.035 - 0.057 in) | ||
|---|---|---|
| Retaining Ring Thickness | Ring Identification Color | |
| Metric | English | |
|
NOTE:
After measuring clutch pack travel, determine if the measurement is within the specification. If the measurement is not within the specification, measure the thickness of the existing retaining ring and then choose a thicker or thinner retaining ring that will bring the measurement within specification.
|
||
| 2.55 - 2.85 mm | 0.100 - 0.112 in | Dark Green |
| 2.87 - 2.97 mm | 0.113 - 0.117 in | Yellow |
| 3.20 - 3.30 mm | 0.126 - 0.130 in | Purple |
| 3.52 - 3.62 mm | 0.139 - 0.143 in | Light Blue |
| 3.85 - 3.95 mm | 0.152 - 0.156 in | Orange |