LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2017 >> Malibu LS >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 9 (Automatic Transmission - 5ET50 (MKE)) >> Repair Instructions - On Vehicle >> Control Solenoid Valve Replacement >> Installation Procedure

Installation Procedure

WARNING: This page is about a different variant/trim than selected.
  1. Control Solenoid Valve Filter Plate (3) - Install
    Fig 1: Control Valve Body Bolts, Control Solenoid Valve And Filter Plate
    GM4117450Courtesy of GENERAL MOTORS COMPANY
  2. Control Solenoid Valve (2) - Install
  3. Control Valve Body Bolt (1) - Install [4x] - Hand tighten
  4. Control Solenoid Valve Wiring Harness - Connect
  5. Control Valve Body Bolt - Tighten in sequence 9 N.m (80 lb in)
    Fig 2: Control Valve Body Bolts Tightening Sequence
    GM4117465Courtesy of GENERAL MOTORS COMPANY
  6. Control Valve Body Cover Replacement  - Install