Component Testing
WARNING: This page is about a different variant/trim than selected.
- Test for 6100 - 6150 Ω between the control terminal 3 and the ground terminal 2 when no S2 Manual Shift Switch button is pressed.
- If not between 6100 - 6150 Ω
Replace the S3 Transmission Shift Lever.
- If between 6100 - 6150 Ω
- If not between 6100 - 6150 Ω
- Test for 4100 - 4150 Ω between the control terminal 3 and the ground terminal 2 when plus S2 Manual Shift Switch button is pressed.
- If not between 4100 - 4150 Ω
Replace the S3 Transmission Shift Lever.
- If between 4100 - 4150 Ω
- If not between 4100 - 4150 Ω
- Test for 5450 - 6000 Ω between the control terminal 3 and the ground terminal 2 when minus S2 Manual Shift Switch button is pressed.
- If not between 5450 - 6000 Ω
Replace the S3 Transmission Shift Lever.
- If between 5450 - 6000 Ω
- If not between 5450 - 6000 Ω
- All OK.