Harsh, Soft, Delayed or Slipping Drive or Reverse Gear
WARNING: This page is about a different variant/trim than selected.
| Checks |
Causes |
| Variable Low Clutch Assembly |
- Inspect for damaged or worn variable low clutch plates.
- Inspect for damaged variable low clutch backing plate.
- Inspect for damaged variable low clutch backing plate retaining ring.
- Inspect for damaged variable low clutch piston assembly and spring.
|
| Variable High Clutch Assembly |
- Inspect for damaged or worn variable high clutch plates.
- Inspect for damaged variable high clutch backing plate.
- Inspect for damaged variable high clutch backing plate retaining ring.
- Inspect for damaged variable high clutch piston assembly and spring.
|
| Control Valve Assembly |
- Inspect solenoid module assembly for damage to plastic body, electrical connections and wire harness or seal plate.
- Inspect low variable shift valve for stickiness or stuck condition.
- Inspect for stuck or sticky compensator feed valve.
- Inspect for leak paths within the variable high or compensator feed hydraulic circuits.
- Inspect for leaking or damaged control valve body spacer plate.
- Inspect for plugged control valve body spacer plate orifice(s).
|