Conditions for Setting the DTC

Any one or more of the following conditions:

• The Internal Mode Switch signal circuit A, B, P or S are Low in Park for greater than 8 s.
• The Internal Mode Switch signal circuit A is Low in D for 8 s.
• The Internal Mode Switch signal circuit C is High in D for 8 s.
• The hybrid/EV powertrain control module 1 detects an invalid range from the Internal Mode Switch for 3.25 s.
• The Internal Mode Switch signal circuit C is high in D for greater than 8 s.
• Park/Neutral Switch equals P/N and the Internal Mode Switch state is not Park or Neutral or the Park/Neutral switch is not Park or Neutral and the Internal Mode Switch state equals Park or Neutral for 4 s.
• Or the transmission internal mode switch indicates a transitional state for 8 s.