Circuit/System Verification
WARNING: This page is about a different variant/trim than selected.
- Verify there are no other Hybrid/EV Powertrain Control Module 1 or communication DTCs set.
- If a DTC is set
Refer to Diagnostic Trouble Code (DTC) List - Vehicle .
- If a DTC is not set
- If a DTC is set
- Complete the diagnosis by looking for a CAN fault. Refer to Scan Tool Does Not Communicate with High Speed GMLAN Device
.
- If a CAN circuit fault is found
Repair as necessary.
- If a CAN circuit fault is not found
- If a CAN circuit fault is found
- Replace the T6 Power Inverter Module.