LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2017 >> Malibu LS >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 9 (Automatic Transmission - 5ET50 (MKE)) >> Diagnostic Information and Procedures >> DTC P0815, P0816 or P0826: Shift Switch Circuit >> Component Testing

Component Testing

WARNING: This page is about a different variant/trim than selected.
  1. Test for 6100 - 6150 Ω between the control terminal 3 and the ground terminal 2 when no S2 Manual Shift Switch button is pressed.
    • If not between 6100 - 6150 Ω 

      Replace the S3 Transmission Shift Lever.

    • If between 6100 - 6150 Ω 
  2. Test for 4100 - 4150 Ω between the control terminal 3 and the ground terminal 2 when plus S2 Manual Shift Switch button is pressed.
    • If not between 4100 - 4150 Ω 

      Replace the S3 Transmission Shift Lever.

    • If between 4100 - 4150 Ω 
  3. Test for 5450 - 6000 Ω between the control terminal 3 and the ground terminal 2 when minus S2 Manual Shift Switch button is pressed.
    • If not between 5450 - 6000 Ω 

      Replace the S3 Transmission Shift Lever.

    • If between 5450 - 6000 Ω 
  4. All OK.
scientia non olet · About LEMON Manuals