LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2017 >> Malibu LS >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 4 (Hybrid/EV Energy Storage System) >> Repair Instructions >> Battery Cover Replacement (Front Panel) >> Removal Procedure

Removal Procedure

WARNING: This page is about a different variant/trim than selected.
  1. Disable the high voltage system. Refer to High Voltage Disabling 
  2. High Voltage Battery Cover (2) - Remove High Voltage Battery Cover Replacement 
    Fig 1: High Voltage Battery Cover
    GM4318393Courtesy of GENERAL MOTORS COMPANY
  3. High Voltage Battery (1) - Remove High Voltage Battery Replacement and Shipping Preparation 
    Fig 2: High Voltage Battery
    GM4321377Courtesy of GENERAL MOTORS COMPANY
  4. High Voltage Battery Tray Reinforcement - Left Side (1) - Remove High Voltage Battery Tray Reinforcement Replacement (Left Side) 
    Fig 3: High Voltage Battery Tray Reinforcement -- Left Side
    GM4321622Courtesy of GENERAL MOTORS COMPANY
  5. High Voltage Battery Tray Reinforcement - Right Side (1) - Remove High Voltage Battery Tray Reinforcement Replacement (Right Side) 
    Fig 4: High Voltage Battery Tray Reinforcement -- Right Side
    GM4322220Courtesy of GENERAL MOTORS COMPANY
  6. Battery Cover Bolt (1) - Remove [4x]
    Fig 5: Battery Cover Bolt
    GM4325171Courtesy of GENERAL MOTORS COMPANY
  7. Battery Cover Bolt (1) - Remove [2x]
    Fig 6: Battery Cover -- Front
    GM4325172Courtesy of GENERAL MOTORS COMPANY
  8. Battery Cover (2) - Remove
scientia non olet · About LEMON Manuals