LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2017 >> Malibu LS >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 4 (Hybrid/EV Energy Storage System) >> Repair Instructions >> Battery Cover Replacement (Back Panel) >> Removal Procedure

Removal Procedure

WARNING: This page is about a different variant/trim than selected.
  1. Disable the high voltage system. Refer to High Voltage Disabling 
  2. Disconnect the battery negative cable. Refer to Battery Negative Cable Disconnection and Connection (without KL9)Battery Negative Cable Disconnection and Connection (with KL9)
  3. High Voltage Battery (1) - Remove High Voltage Battery Replacement and Shipping Preparation 
    Fig 1: High Voltage Battery
    GM4321377Courtesy of GENERAL MOTORS COMPANY
  4. High Voltage Battery Tray Reinforcement - Left Side (1) - Remove High Voltage Battery Tray Reinforcement Replacement (Left Side) 
    Fig 2: High Voltage Battery Tray Reinforcement -- Left Side
    GM4321622Courtesy of GENERAL MOTORS COMPANY
  5. High Voltage Battery Tray Reinforcement - Right Side (1) - Remove High Voltage Battery Tray Reinforcement Replacement (Right Side) 
    Fig 3: High Voltage Battery Tray Reinforcement -- Right Side
    GM4322220Courtesy of GENERAL MOTORS COMPANY
  6. High Voltage Battery Cover Reinforcement (2) - Remove High Voltage Battery Cover Reinforcement Replacement 
    Fig 4: High Voltage Battery Cover Reinforcement
    GM4323801Courtesy of GENERAL MOTORS COMPANY
  7. Battery Cover Bolt (1) - Remove [4x]
    Fig 5: Battery Cover Bolt
    GM4323857Courtesy of GENERAL MOTORS COMPANY
  8. Battery Cover Bolt (1) - Remove [2x]
    Fig 6: Battery Cover -- Back
    GM4323859Courtesy of GENERAL MOTORS COMPANY
  9. Battery Cover (2) - Remove
scientia non olet · About LEMON Manuals