Installation Procedure

WARNING: This page is about a different variant/trim than selected.

Auxiliary Battery Cable (4) - Install

Fig 1: Auxiliary Battery Negative Cable
Courtesy of GENERAL MOTORS COMPANY
Auxiliary Battery Cable Nut (1) - Install and tighten [2x] 9 N.m (80 lb in)
CAUTION: Refer to Fastener Caution
Electrical Connector (3) - Connect
Retainer Clip (2) Engage [2x]
High Voltage Battery Tray Reinforcement - Right Side (1) - Install High Voltage Battery Tray Reinforcement Replacement (Left Side) High Voltage Battery Tray Reinforcement Replacement (Right Side)

Fig 2: High Voltage Battery Tray Reinforcement -- Right Side
Courtesy of GENERAL MOTORS COMPANY
High Voltage Battery Tray Reinforcement - Left Side (1) - Install High Voltage Battery Tray Reinforcement Replacement (Left Side)

Fig 3: High Voltage Battery Tray Reinforcement -- Left Side
Courtesy of GENERAL MOTORS COMPANY
High Voltage Battery (1) - Install High Voltage Battery Replacement and Shipping Preparation

Fig 4: High Voltage Battery
Courtesy of GENERAL MOTORS COMPANY
Enable the high voltage system. Refer to High Voltage Enabling