LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2017 >> Malibu LS >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 4 (Hybrid/EV Energy Storage System) >> Diagnostic Information and Procedures >> DTC P0AC1 or P0AC2: Hybrid/EV Battery Current Sensor Circuit >> Circuit/System Verification

Circuit/System Verification

WARNING: This page is about a different variant/trim than selected.
  1. Vehicle in Service Mode, all accessories OFF.
  2. Verify the scan tool hybrid/EV powertrain control module 2 Hybrid/EV Battery Pack Current parameter is between -365.1 A and +274.6 A and changes with the amount of current draw on the hybrid/EV battery pack.
    NOTE: Typical current in a parked vehicle with the Vehicle in Service Mode and all accessories OFF is between 1 A and 10 A.
    • If not within the specified range 

      Refer to Circuit/System Testing.

    • If within the specified range 
  3. All OK.
scientia non olet · About LEMON Manuals