LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2017 >> Malibu LS >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 25 (Automatic Transmission - 9T50 (M3E) - Repair Instructions - On Vehicle) >> Repair Instructions - On Vehicle >> Manual Shift Shaft Seal Replacement >> Removal Procedure

Removal Procedure

WARNING: This page is about a different variant/trim than selected.
  1. Remove the manual shift detent lever shaft assembly. Refer to Manual Shift Detent Lever Shaft Replacement 
  2. Remove the manual shaft seal (1) using DT-45201  remover.
    Fig 1: Manual Shaft Seal
    GM4493722Courtesy of GENERAL MOTORS COMPANY
scientia non olet · About LEMON Manuals