Fuel Pump Insulator Replacement

WARNING: This page is about a different variant/trim than selected.

Fig 1: Fuel Pump Insulator

Courtesy of GENERAL MOTORS COMPANY

Callout	Component Name
Preliminary Procedures Fuel Pump Cover Replacement Disconnect the electrical connector.
1	Fuel Pump Insulator WARNING: The noise cancelling foam component MUST be replaced if it has been exposed to engine fluids. Failure to replace the noise cancelling foam component that has been exposed to engine fluids may result in an engine fire resulting in catastrophic engine damage and possible injury or death. NOTE: The fuel pump insulator snaps into place.

Callout

Component Name

Preliminary Procedures

Fuel Pump Cover Replacement
Disconnect the electrical connector.

Fuel Pump Insulator

WARNING: The noise cancelling foam component MUST be replaced if it has been exposed to engine fluids. Failure to replace the noise cancelling foam component that has been exposed to engine fluids may result in an engine fire resulting in catastrophic engine damage and possible injury or death.

NOTE: The fuel pump insulator snaps into place.