Conditions for Running the DTC
WARNING: This page is about a different variant/trim than selected.
P0815, P0816
- DTC P0815, P0816, P0826, P1761 = Not set
- Engine Speed=400 to 7, 500 RPM
- Greater than 1 s since last transmission shift operation.
- Ignition Voltage=Greater than 9 V
Frequency the DTC runs=Continuously - After the running conditions are met
P0826
- DTC P1761 = Not set
- Engine Speed=400 to 7, 500 RPM
- Ignition Voltage=Greater than 9 V
Frequency the DTC runs=Continuously - After the running conditions are met