Actions Taken When the DTC Sets

DTCs listed in the DTC Descriptor Category=Type A DTC

• {P2802, P2803, P2805} M64 Starter Motor=Disabled
• Autostart/Autostop=Disabled
• Default shift pattern=Enabled
• Grade braking=Disabled
• High Side Driver 1=Off
• {P0707, P0708} High Side Driver 2=Off
• Line Pressure Command=Maximum
• Neutral Idle Mode=Disabled
• Powertrain braking=Disabled
• Tap Up & Tap Down=Disabled
• TCC Control=Disabled
• Transmission Adaptive Pressure Control =Freeze current adapt values
• High Side Driver 1, 2 = Off