Rear Seat Back Cushion Cover and Pad Replacement (40%)

Preliminary Procedures

1. Remove rear seat. Refer to Rear Seat Removal and Installation (60/40 Bench) 
2. Remove rear seat head restraint guide. Refer to Rear Seat Head Restraint Guide Replacement 
3. Remove Rear Seat Armrest. Refer to Rear Seat Armrest Replacement (60/40 Bench) 
4. Remove Rear seat center buckle side belt. Refer to Rear Seat Center Buckle Side Belt Replacement
5. Remove rear seat belt opening bezel. Refer to Rear Seat Belt Opening Bezel Replacement 

Procedure

1. Disconnect the seat back cushion cover j-channel.
2. Remove the four push in retainers holding the cover to the seat back frame.
3. Disconnect the electrical connector if equipped with heated seat.
4. Pull the seat back cushion cover away from the seat cushion pad to disengage the hook and loop fasteners.