Rear Seat Recliner Actuator Replacement (with Split Bench)

Fig 1: View Of Rear Seat Recliner Actuator Assembly & Screws

Courtesy of GENERAL MOTORS COMPANY

Callout	Component Name
Preliminary Procedures Fold the seat forward. Remove the rear seat cushion trim panel. Refer to Rear Seat Cushion Trim Panel Replacement (60/40 Bench) .
1	Rear Seat Recliner Actuator Screw (Qty: 2) CAUTION: Refer to Fastener Caution . NOTE: The 60 percent seat is shown, the 40 percent seat is similar. Tighten 3 N.m (27 lb in)
2	Rear Seat Recliner Actuator Assembly Disconnect the electrical connector. Disconnect the actuator cable assembly.

Callout

Component Name

Preliminary Procedures

Fold the seat forward.
Remove the rear seat cushion trim panel. Refer to Rear Seat Cushion Trim Panel Replacement (60/40 Bench) .

Rear Seat Recliner Actuator Screw (Qty: 2)

CAUTION:

NOTE:

The 60 percent seat is shown, the 40 percent seat is similar.

Tighten
3 N.m (27 lb in)

Rear Seat Recliner Actuator Assembly