Liftgate Trim Finish Panel Replacement

Fig 1: Liftgate Trim Finish Panel

GM3637346

Courtesy of GENERAL MOTORS COMPANY

Callout

Component Name

Preliminary Procedure

Remove the liftgate upper trim finish panel. Refer to Liftgate Upper Trim Finish Panel Replacement .
Remove the liftgate trim finish panel pull cup. Refer to Liftgate Trim Finish Panel Pull Cup Replacement .

1

Liftgate Lower Trim Finish Panel Fastener

CAUTION:

Refer to Fastener Caution .

Tighten
9 N.m (80 lb in)

2

Liftgate Trim Finish Panel Assembly

Procedure

Use a trim panel removal tool to aid in the removal of the trim panel from the liftgate assembly.
Lift the liftgate trim finish panel out and over the liftgate window upper garnish molding retainers.
Disconnect the electrical connector, if equipped.