Rear Seat Riser Replacement (Bucket)

Fig 1: Rear Seat Riser And Components (Bucket)

Courtesy of GENERAL MOTORS COMPANY

Callout	Component Name
Preliminary Procedures Remove the rear seat. Refer to Rear Seat Removal and Installation (Bucket) .
1	Rear Seat Riser Finish Cover Fastener CAUTION: Refer to Fastener Caution .
2	Rear Seat Riser Opening Finish Cover Procedure Remove the rear seat riser opening finish cover. Refer to Rear Seat Riser Opening Finish Cover Replacement .
3	Rear Seat Riser Finish Cover Procedure Remove the rear seat riser finish cover. Refer to Rear Seat Riser Finish Cover Replacement
4	Rear Seat Riser Bolt (Qty: 2) Tighten 9 N.m (80 lb in) Procedure Remove the rear seat cushion trim panel (bucket) to access the bolts. Refer to Rear Seat Cushion Trim Panel Replacement (Bucket) .
5	Rear Seat Riser Procedure Disconnect the seat riser strut from the seat riser. Disconnect the electrical harness retainers and connector from the seat riser.