Hood Replacement

Fig 1: Hood Hinge Nut

Courtesy of GENERAL MOTORS COMPANY

Callout	Component Name
WARNING: When a hood hold open device is being removed or installed, provide alternate support to avoid the possibility of damage to the vehicle or personal injury. Preliminary Procedure Remove the windshield washer nozzle hose. Refer to Windshield Washer Nozzle Hose Replacement .
1	Hood Hinge Nut (Qty: 4) CAUTION: Refer to Fastener Caution . Tighten 18 N.m (13 lb ft)
2	Hood Procedure Transfer components as necessary. Adjust hood as needed. Refer to Hood Adjustment .

Callout

Component Name

WARNING: When a hood hold open device is being removed or installed, provide alternate support to avoid the possibility of damage to the vehicle or personal injury.

Preliminary Procedure Remove the windshield washer nozzle hose. Refer to Windshield Washer Nozzle Hose Replacement .

Hood Hinge Nut (Qty: 4)

CAUTION: Refer to Fastener Caution .

Tighten
18 N.m (13 lb ft)

Hood

Procedure

Transfer components as necessary.
Adjust hood as needed. Refer to Hood Adjustment .