Front Side Door Replacement

Fig 1: Front Side Door

Courtesy of GENERAL MOTORS COMPANY

Callout	Component Name
Preliminary Procedures Mark the location of the hinge before removing the bolts with a grease pencil. Remove the front door trim. Refer to Front Side Door Trim Replacement .
1	Front Side Door Check Link Bolt CAUTION: Refer to Fastener Caution . Procedure Remove the water deflector. Disconnect the door electrical connector. Support the door before removing the hinge bolts. With an assistant, remove the door. Tighten 25 N.m (18 lb ft)
2	Front Side Door Lower Hinge Bolt (Qty: 2) Tighten 28 N.m (21 lb ft)
3	Front Side Door Upper Hinge Bolt (Qty: 2) Tighten 28 N.m (21 lb ft)
4	Front Side Door Procedure Transfer all components as necessary. If the door striker needs adjust. Refer to Front Side Door Lock Striker Adjustment . Front door adjustment. Refer to Front Side Door Adjustment . NOTE: Inspect the door for proper operation before installing the door trim.