LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2015 >> Cruze LT, Automatic Trans >> Repair and Diagnosis >> Heating, Ventilation & A/C (HVAC) >> HVAC Control Systems >> Heating, Ventilation And Air Conditioning >> Repair Instructions >> Floor Air Outlet Replacement >> Removal Procedure

Removal Procedure

  1. Remove the instrument panel assembly. Refer to Instrument Panel Assembly Replacement .
  2. Remove the instrument panel wiring harness (2) from the instrument panel tie bar (1).
    Fig 1: Instrument Panel Wiring Harness And Instrument Panel Tie Bar
    GM2027818Courtesy of GENERAL MOTORS COMPANY

    Disconnect the electrical connectors.

  3. Remove the instrument panel tie bar (2).
    Fig 2: Instrument Panel Tie Bar, Bolts And Nuts
    GM2027821Courtesy of GENERAL MOTORS COMPANY
    • Remove the 4 instrument panel tie bar bolts (3, 4).
    • Remove the 2 instrument panel tie bar nuts (1).
  4. Remove the heater wiring harness.
  5. Remove the floor air outlet (2).
    Fig 3: Floor Air Outlet
    GM2027861Courtesy of GENERAL MOTORS COMPANY

    Remove the 6 floor air outlet bolts (1).