Installation Procedure
- Install floor air outlet duct (2) - left side.
- Install floor air outlet duct bolt (1) - left side and tighten to 1.6 N.m (14 lb in).CAUTION: Refer to Fastener Caution .
- Install instrument panel lower trim pad cover - left side. Refer to Instrument Panel Lower Trim Pad Cover Replacement (without Knee Airbag) and Instrument Panel Lower Trim Pad Cover Replacement (with Knee Airbag) .
- Install instrument outer trim cover - left side. Refer to Instrument Panel Outer Trim Cover Replacement - Left Side .